
Bonetti Campers was established in 2012 by Stefano Bonetti. With his extensive knowledge in 4wd Camper Conversion as Master Mechanic in Switzerland working in different many fields. Including 4wd Camper Conversion in automotive technologies, from cars, trucks buses, construction vehicles to recreational vehicles.
Working on recreational vehicles begun when he moved away from Switzerland to California in 2006. This insight into the RV technologies of the US market opened up a way to Australia, where he worked for KEA Campers as National Fleet Operations Manager. After a short work assignment at KEA Campers in Namibia as General Manager, which gave him a great insight into the African RV market and off road conditions for a 4wd Camper Conversion.
4WD Camper Conversion Cruisinator
With all this knowledge Bonetti Campers in 4WD Camper Conversion started to build the Cruisinator 6×6, but after KEA closed its doors, Stefano was offered to buy the parts stock of KEA, which made Bonetti Camper as main suppliers for KEA Camper parts and most important factory trained knowledge.
4WD Camper Conversion Pop-Top Car Camper
Stefano’s passion for the open spaces of the Australian landscape, 4WD Camper Conversion vehicles and Pop-Top Car Campers made to travel the world. Whilst he loved the KEA Conqueror which he redesigned the interior in 2008, he felt there can be much more achieved with a drastic design change to the better. In 2015, shortly after moving the business to the beautiful Sunshine Coast, he started to design the Cruisinator

The design specification had to cover following minimal achievements:
- Minimal modification to original vehicle roof, leaving the drivers cabin in original state
- Queen-sized bed
- Minimum of 10cm mattress thickness
- More storage
- Simple setup, by lifting the roof and that’s it.
- Custom fridge next to door, to allow easy access to stock and use fridge
- Spacious and useable cabinetry with safe locking handles
- Ability to install hot water system 14L
- Ability of fresh water tanks up to 100l
- Ability for grey water tank fitted
- Ability to fit almost any awning available
- Low centre of gravity
- Flat roof, insulated to allow stick on solar panels, height above bed 80cm
The Cruisinator is born!
Good things take a while…
After nearly one year developing, the first Cruisinator 4wd Camper Conversion was made and a completely new approach to given facts, has been presented to the Overlanding and Expedition Vehicle market worldwide. The deceiving looks, based on the clear lines and bold design, is an eye catcher that will be fully honoured after your first insight into the camper.
The much bigger internal space welcomes you and makes you feel instantly comfortable, the oversized bed is inviting and allows a good night rest, the well sized windows allow fresh air and comfortable sleeping climate. There is an abundance of storage as we tried to use all available spaces, there is storage under the bed and side collars, well sized cabinetry and comfortable space to move around, even when the bed is used, the other person can comfortably sit at the table.
The Cruisinator is hand made to your specifications and all componentry is locally sourced, which allow us to make changes instantly to suit your needs.
We use high quality components which are sourced from the best manufactures to be assembled and made your vehicle performing to highest standards.
Repairs and upgrades to your 4wd Camper Conversion:
We can assist you with any kind of repairs to Campervans, Motorhomes, Slide-on Camper and 4WD Campers, please don’t hesitate to contact us with your questions.


Bonetti Campers designed the Cruisinator ™ through hard earned experiences in the Australian Outback and traveling around the globe. ( We also do repairs any pop and flip top roof conversion ). We are focused to achieve a higher standard vehicle conversion that is currently offered in today’s market. More…
CRUISINATOR™


The mighty CRUISINATOR™ 6X6, the first and biggest of the CRUISINATORS™ was build to conquer any challenges the Australian Outback and the rest of the planet can offer. The aim is to do it in style and all comfort you expect from vehicles much bigger in size and price. A good sized kitchen with 2 burner gas hob More…
CRUISINATOR™ 6×6


Our tyre pressure systems operate effectively on more than 15,000 vehicles across the world and are used for: fire department | mountain search | rescue services | border patrol | military | police More…
ti.systems
Next to the Cruisinator ™ production, we still repair and maintain the ex KEA Campers and any other Slide-on, Camper-van, Motor home and Caravan. We have a very loyal customer base from all over Australia who are happy to come up to the Sunshine Coast to get repairs and servicing done while enjoying a field trip or the long way round, we do upgrades on the battery, chargers, management and solar systems, modify lighting, modify and replace cabinetry and wheel alignment. We can assist with spring upgrades, tires and many things more. The benefit is you can rest assured that I know where is what and how things were made, why they were made that way and can bring back your vehicle to manufacturer’s standards or make your vehicle better performing to suit your needs.
Bonetti Campers is the official importer of the Italian Mondo Pickup Slide-on Camper “Musica”
Mondo Pickup Slide-on Campers ” Musica”, the new “Nota” and customised Slide-ons are imported from Italy and finished here in Australia to local regulations and conditions. They are unique to Australia, ahead in technique and materials, very modern and innovative in design with excellent workmanship. The design suits the new aerodynamically styles of utes perfectly and create balance and harmony, no more shoe boxes style campers on a beautiful new ute.
The floor-plan is outstanding in functionality and comfort. Everything is designed with purpose and finished in excellence.
You can stargaze while laying in the simple fold out bed or even climb thru the skylight onto the roof to embrace the beauty this world can deliver.
The Kitchen is spacious and everything is in reach. There is plenty of storage for everything.
To fit and remove the slide-on camper different systems are available to choose from. We can fit internally 4 electric driven jacking legs which are controlled by remote control.
The unit will be made to specifications and needs. Please contact us for more information and a quote.
We can build the outer shell in fibreglass or carbon fibre. All bodies are fully insulated and made in a 2 skin vacuum process, which gives maximum stability and rigidity with lowest weight.
KEA Campervans, 4WD Campers and Motorhomes
We are the only parts stockist for KEA Campervans, 4WD Campers and Motorhomes in Australia. Due to my career as Fleet Operations Manager for KEA Campers Australia, I have the insight and understanding of these vehicles and care about them with lots of TLC as you do.

CRUISINATOR Pop Top Conversion for all Toyota Land Cruiser Series 70 Troop Carriers, KEA Campers Repairs and parts, Repair and Maintenance of Campervans, Motorhomes , Caravans and 4WD Campers. Solar Systems and Lithium Batterie Systems, Water Tanks and Hot Water Systems.